Large Orders nt hetas Accreditations sfl intall Secured by SagePay special offers CF
Display: Grid List
Show:
Fixed straight lengths are available in four sizes: 152mm, 305mm, 457mm, and 914mm (6in, 12in, 18in, and 36in). Installed effective length is 38mm (11/2in) less than stated actual length. …
Price starting from:
£65.54 (ex. VAT) £78.65 (inc. VAT)
Ex Tax: £0.00
Fixed straight lengths are available in four sizes: 152mm, 305mm, 457mm, and 914mm (6in, 12in, 18in, and 36in). Installed effective length is 38mm (11/2in) less than stated actual length. …
Price starting from:
£34.65 (ex. VAT) £41.58 (inc. VAT)
Ex Tax: £0.00
Fixed straight lengths are available in four sizes: 152mm, 305mm, 457mm, and 914mm (6in, 12in, 18in, and 36in). Installed effective length is 38mm (11/2in) less than stated actual length. …
Price starting from:
£25.28 (ex. VAT) £30.34 (inc. VAT)
Ex Tax: £0.00
Fixed straight lengths are available in four sizes: 152mm, 305mm, 457mm, and 914mm (6in, 12in, 18in, and 36in). Installed effective length is 38mm (11/2in) less than stated actual length. …
Price starting from:
£22.47 (ex. VAT) £26.96 (inc. VAT)
Ex Tax: £0.00
Price starting from:
£23.35 (ex. VAT) £28.02 (inc. VAT)
Ex Tax: £0.00
This component must be used to connect the system to an appliance spigot. It cannot be used as a substitute for the Adaptor to Flue Liner. …
Price starting from:
£8.26 (ex. VAT) £9.91 (inc. VAT)
Ex Tax: £0.00
This component is used to connect a 125mm system to an appliance which has a 100mm spigot and the flue size has to be enlarged, as recommended by the appliance manufacturer. …
Price starting from:
£15.92 (ex. VAT) £19.10 (inc. VAT)
Ex Tax: £15.92
Lower end of this all stainless steel component connects to standard product, upper end fits over flexible flue liner. Also used to connect to fibre cement flue liners. …
Price starting from:
£14.64 (ex. VAT) £17.57 (inc. VAT)
Ex Tax: £0.00
Designed to be secured into the top of a stainless steel flexible flue liner at the point where the liner exits an existing masonry, or similar chimney. Connection would normally be in the …
Price starting from:
£14.64 (ex. VAT) £17.57 (inc. VAT)
Ex Tax: £0.00
Price starting from:
£46.10 (ex. VAT) £55.32 (inc. VAT)
Ex Tax: £46.10
Price starting from:
£35.99 (ex. VAT) £43.19 (inc. VAT)
Ex Tax: £35.99
Price starting from:
£36.52 (ex. VAT) £43.82 (inc. VAT)
Ex Tax: £0.00
Price starting from:
£36.52 (ex. VAT) £43.82 (inc. VAT)
Ex Tax: £0.00
Price starting from:
£33.47 (ex. VAT) £40.16 (inc. VAT)
Ex Tax: £0.00
Price starting from:
£7.12 (ex. VAT) £8.54 (inc. VAT)
Ex Tax: £0.00

ILS Residential Oil Twin Wall Flue System

The ILS Flue System has been purposely designed for internal and external use with oil fired heating equipment, burning low sulphur content 28 sec. viscosity oil, viz., kerosene. ILS is based on the design of , and manufactured to the same high quality
characteristics of the well established and proven IL gas vent system. As such, ILS is also suitable for use on draught-hooded gas fired equipment, where for technical reasons, the application may require a stainless steel lined product. ILS and IL are
completely interchangeable and as such require no additional fittings to connect one with the other. The ILS Flue system may also be used where greater thermal efficiency within the flue is required, such as exposed external runs, flues located within
vented roof spaces, and with high efficiency gas fires. Where used with gas fired appliances, the installation requirements are as defined in the separately available IL Gas Vent literature.